Designed for use with 3 wire Brushless motor systems.

Designed for use with 3 wire Brushless motor systems.

ElectriFly Charge Lead with Banana Plugs and Dean's Micro Connector.

Maximum Recommended Current: 10A

Connector #1: Banana Plugs

Connector #2: Dean's Micro (Negative (-) Pin)

16AWG Wire

One Piece of ElectriFly 2S Hi-Power Adapters with Dean's Ultra Male Plug for FlightPower and Thunder Power LiPo Batteries Wired for Balancing.

FEATURES:

Allows Charging or Discharging of FlightPower and Thunder Power brand LiPos up to 6 amps through the Electrifly Equinox LiPo Cell Balancer
One year limited warranty (US and Canada only)

INCLUDES:

One ElectriFly 2S Hi-Power Adapter with Dean's Ultra Male Plug
and information sheet

SPECS:

Compatible Input: Equinox LiPo Cell Balancer (GPMM3160)

Voltage Range: 2S (7.4V)

Max. Current: 6A

Deans Ultra Male Battery Power Connector

*These high powered adapters are unlike the adapters included with the Equinox LiPo Cell Balancer. Instead of all current being transferred between the battery and charger through the Balancing Connectors, some current is also transferred through the Deans Plug. The Balancing Connectors still allow Equinox to monitor the voltage of each cell in the pack. ALL connectors must be connected for these adapters to work correctly.

FEATURES:

Mounts to R/C cars and aircraft Tube is 457mm long with two plugs for attaching multiple tubes to model Controller mounts easily with included double-sided tape and allows switching from constant light to blinking mode Made of Electroluminescent Lights

INCLUDES: Blue Light Tube Kit with Controller and Double-Sided Tape

Use with 4.8V or 6V power source

Length: 457mm

Diameter: 2mm

FEATURES:

Mounts to R/C cars and aircraft Tube is 457mm long with two plugs for attaching multiple tubes to model Controller mounts easily with included double-sided tape and allows switching from constant light to blinking mode Made of Electroluminescent Lights

INCLUDES: White Light Tube Kit with Controller and Double-Sided Tape

Use with 4.8V or 6V power source

Length: 457mm

Diameter: 2mm

FEATURES:

• Designed to power the receiver in a model airplane in two different configurations-
• Primary intended use is as a 3 amp voltage regulator by plugging thereceiver LiPo battery into the Deans connector on the BEC and then into the battery channel on receiver
• Can also be used in a three-way connection with the ESC/LiPo to eliminate the need to add a battery for the receiver, Parallel Deans Connector required (GPMM3141)
• 5V or 6V selector allows use of smaller servos limited to 5V
• 180 day limited warranty by ElectriFly, USA and Canada only

INCLUDES:

• ElectriFly 3A BEC (battery eliminator circuit) for 2S-6S LiPo Batteries, universal receiver connector, Deans Male Ultra input connector and instructions.

SPECS:

• Battery Type: 2 - 6S LiPo (7.4V - 22.2V)
• 6 - 18C NiMH/NiCd (7.2V - 21.6V)
• Max Constant Current: 3 amps
• Selectable Output Voltage: 5 - 6V