1 pc. of Hobbico Futaba J Leads for use with either Servos or Batteries.

Male lead comes with wire and pins pre-installed into it.

Pre-tinned exposed wire tips are ready for soldering.

Includes 1 pieces of Futaba J Servo/Battery Lead w/10" Wire

Wire Gauge: 24

Wire Color Codes:

• Black: negative
• Red: positive
• White: signal (polarity tab is on the signal side)

Has a glow-plug charging plug on one end with one Positive and one Negative Banana Plug on the other end.

Works with all types of hand held Glow Starters that use NiCd & NiMH batteries.

A pair of Insta-Gator Clips from Hobbico.

4mm female banana jacks built into the handles of alligator clips are ideal for creating a direct connection between a charger and a field battery

A great convenience for modelers who have different power sources with different output terminals

Comes with two Hobbico Insta-Gator clips (one with red vinyl handle covers and one with black vinyl handle covers)

Plugging 4mm male banana leads (not included) into female banana jacks on clips

Useful for a Variety of hobby and craft projects

Cuts Paper, Film, Leather, Vinyl, Fabric, Plastics, Rubber, and more

Cuts Circles from 10mm (.39") to 150mm (5.9")

INCLUDES:

• One Circle Cutter w/Blade, available separately HCAR0231
• Six Extra Blades.
  

LiFe (lithium iron phosphate LiFePO4) offers a lightweight, high energy density battery with more power than NiCd and NiMH receiver batteries provide nominal voltage rating of only 6.6V typically does not require a regulator to power receiver and servos.

Three discharge leads. Two with Universal Receiver Plugs with 22AWG 130mm long wire these are for models with dual power switches, regulators with redundant inputs, redundant radio systems, or for applications that draw more current than a single plug can safely deliver One Discharge Lead with Deans Ultra Female Plug 14AWG 130mm for voltage regulators, power distribution boxes and applications drawing more than 10 amps.

SPECS:

• Capacity: 1800mAh
• Number of Cells in Series: 2
• Rated Voltage: 6.6V
• Continuous Discharge Rate: 10C (18amps)
• Maximum Recommended Charge Rate: 2C (3.6 amps)
• Connector: *Same as photo shown
• Dimensions: 106 x 37 x 20mm
• Weight: 130g