Home > All Brands > TAMIYA > TGX
Tamiya TGX Chassis Parts, Hop Ups
Sort By:
Page of 1
Tamiya 5mm E Ring 50589 Tamiya 2x10mm Shaft 10pcs 50594 Tamiya C.V.A. Mini Shock Unit II V Parts Damper Collar 50598
* This item was taken out from the TG10 MK2 Car Kit, No Tamiya Original Packing * This item was taken out from the Tamiya Car Kit, No Tamiya Original Packing * This item was taken out from the Tamiya Car Kit, No Tamiya Original Packing
Tamiya 3x14mm Step Tapping Screw 5pcs 50582 Tamiya 5mm Ball Connector 4pcs 9804205 Tamiya CVA Mini Shock Unit II Oil Seal 6pcs. 50600
* This item was taken out from the Tamiya Car Kit, No Tamiya Retail Packing. No Original Packaging.
 		* This item was taken out from the Tamiya Car Kit, No Tamiya Original Packing.
Tamiya 4mm Flange Locknut 9805557 Tamiya 3x10mm Step Screw 5pcs 50579 Tamiya Damper O Ring (Red Color) 10pcs 50597
* This item was taken out from the TG10 MK2 Car Kit, No Tamiya Retail Packing * This item was taken out from the Tamiya Car Kit, No Tamiya Original Packing
Tamiya Box Wrench 1pc 5494002 Tamiya 6mm Snap Pin (Body Clip) 10 pcs. 9805702 Tamiya 3x22mm Screw Pin 4 pcs. 9805755
* This item was taken out from the Tamiya Car Kit, No Tamiya Original Packing.
 		* This item was taken out from the Tamiya Car Kit, No Tamiya Original Retail Packing
* This item was taken out from the Tamiya Car Kit, No Tamiya Original Retail Packing.
Tamiya 5mm Ball Connector 10pcs. 50592 Tamiya TGX C Parts Front Upright 50608 Tamiya TGX Shaped Tire Inserts 2pcs 53203
* This item was taken out from the Tamiya Car Kit, No Tamiya Original Retail Packing.
Tamiya TGX 2-Speed Transmission Clutch Shoe Set 53212 Tamiya TGX 2 Speed Transmission Steel Pinion Gear 16T 20T 53283 Tamiya 4WD Front One-Way Differential Unit 53200

Usable With:

  • TGX-MK.1 Chassis Equipped with Tamiya part 53210
  • TG10-Mk.1 Chassis Equipped with Tamiya part 53359
  • TGR
  • TG10R

N Parts and One-Way Bearing

INCLUDES:

  • Two One Way Shafts
  • One 9 mm Washer
  • One 8 mm One-Way Bearing
  • One N Parts Tree

Fits Tamiya TGX, TG-10, TA03, TL-01 & M03.
Tamiya TGR TGX Slick Tire 2pcs 53419

For use Tamiya's TGR and TGX Mk.1 chassis cars.

Low-height tire contains a fiber belt, heightening durability and minimizing deformation.

Slick racing tires.

Provides extra-high grip even on oily running surfaces or during cornering.

Inner foam inserts are included.

Can be used on front or rear.

Includes Two Low-Height Reinforced Tires with Inner Sponge Inserts.

  • Inner Diameter: 2.0" (50mm)
  • Outer Diameter: 2.8" (71mm)
  • Width: 1.3" (33mm)